The safety device for the power press machine shall be marked the following items:
1. manufacture number.
2. manufacturer.
3. manufacture date.
4. applicable the press machine type, capability, stroke (except the two-hand control safety device), the number of strokes per minute (except the two-hand control safety device and the photoelectric safety device) and die sizes.
5. The two-hand control safety device or the photoelectric safety device shall be marked in accordance with the following provisions:
(1) for the safe-one-stroke-two-hand control safety device: the time (Tl, in milliseconds) that hands releasing from the operating portion of that device to the starting action of the protective stop mechanism.
(2) for the two-hand start safety device: the maximum time (Tm) that hands releasing from the operating portion to the slider of the applicable press machine reaching the lower dead center, in millimeters
(3) for the photoelectric safety device: the time that fingers intervening the sensing zone of that device to the starting of the protective stop mechanism, in millimeters.
(4) the stop time (Ts, in milliseconds) of the applicable press machine: the time that the protective stop mechanism starting action to the slider stopping, in milliseconds. But that marked the maximum stop time (Tl+Ts) being exempt from separately marking Tl and Ts.
(5) for the safe-one-stroke- two-hand control safety device or the photoelectric safety device: according to the set stopping time in the preceding subparagraph. For the two-hand start safety device: in accordance with the maximum time separately corresponding to the safe distance set in the preceding subparagraph (2). For two- hand control safety device: the distance between the operating portion and the hazard zone, in millimeters, for photoelectric safety device: the distance between the optical axis and the hazard zone, in millimeters.
6. The photoelectric safety device, in addition to the marking in the preceding subparagraph, shall mark the followings:
(1) the effective distance: referring to the distance that the emitter and receiver can effectively function, in millimeters.
(2) the protective height for the applicable press machine, in millimeters.
7. The laser-sensitive safety device for the press brake, in addition to the marks in the preceding subparagraph 1 through 3, shall separately mark the followings:
(1) the time that from the protective stop mechanism enacted to the slider stopping when the laser shaded, in milliseconds.
(2) the distance between the optic axis of the press brake and the hazard zone , in millimeters and that being corresponding to the time in the subparagraph 7(2).
(3) the effective distance that the laser optical axis can effectively function, in millimeters.
8. The push-out safety device, in addition to the marks in subparagraph 1 through 4, shall separately mark the maximum amplitude of the push-out arm, in millimeters.

The safety device for the shear machine shall be marked the followings:
1. Manufacture number.
2. Manufacturer.
3. Manufacture date.
4. Applicable shear machine type.
5. Shear thickness of the applicable shear machine, in millimeters.
6. Cutter length of the applicable shear machine, in millimeters.
7. Photoelectric safety device: Effective distance that means the emitter and receiver can effectively function, in millimeters.

The press machine shall be clearly and visibly marked with the following information:
1. Manufacture number.
2. Manufacturer.
3. Manufacture date.
4. Machine specifications:
(1) press specifications shall be based on attachment table 35.
(2) applicable shear thickness and cutter length of the shear machine, in millimeters.

The hand-fed planer shall be clearly and visibly marked the followings :
1. Manufacturer.
2. Manufacture date.
3. Rated power or rated current.
4. Rated voltage.
5. No-load speed.
6. Effective planing width.
7. Cutter contact- preventive devices for the applicable effective planning width.

The circular saw shall be clearly and visibly marked with the following items :
1. Manufacturer.
2. Manufacture date.
3. Rated power or rated current.
4. Rated voltage.
5. No-load speed: for the circular saw with a speed change mechanism the no-load speed in the speed changing state.
6. Applicable diameter and type of the circular saw blade, and rotation direction of circular saw shaft; for the circular saw with a speed change mechanism the diameter, type and rotation direction in the speed changing state.
7. Applicable diameter of the circular saw blade, thickness range and the standard table position for the riving knife.
8. Applicable diameter range and the purpose for the teeth contact-preventive device.

The lift-truck shall be clearly and visibly marked the followings :
1. Manufacturer.
2. Manufacture date.
3. Manufacture number.
4. Maximum load.
5. Allowable load: refers to the construct of the lift-truck, material and the loading gravity center position of the fork to determine the maximum load it can withstand.

The grinder shall be clearly and visibly marked the followings :
1. Manufacturer.
2. Manufacture date.
3. Rated voltage.
4. No-load speed.
5. Applicable diameter, thickness and inner diameter of the grinding wheel.
6. Direction of rotation.
7. Guard marking the applicable using highest peripheral velocity, thickness and diameter of the grinding wheel.

The grinding wheel shall be clearly and visibly marked with the following information:
1. Manufacturer.
2. Bonder type.
3. Highest usable peripheral velocity, and should add revolution speed.
4. Manufacturing Number or Manufacturing Lot Number.
For the diameter of grinding wheel under 75 millimeters, the preceding markings can be indicated on the smallest package unit.